F'AirWest - Spezialartikel für Werkstatt und Garten

The belt reel enables guided and controlled rolling up of the ribbon 20 mm. Thanks to the double-shell design, later assembly in the installation is possible. The belt pulley is fixed on both sides of the drive shaft with two hose clamps. The belt pulley can be used for pipes with a diameter of 32 to 34 mm.

The Cable Caddy 510 is a reliable tool for quick and tidy unwinding in your workshop. With this cable dispenser you facilitate the torsion-free unwinding of cables and wires on cable reels.This means that the cables do not twist in themselves. This saves time when laying the cables and is gentle on the material. Ball bearing support rollersOur support rollers are particularly stable and durable, as these are equipped with one ball bearing per side, which are firmly screwed to the side section.These carrying rollers are used exclusively for the CableCaddy product group. Spacer rollers prevent the cable reel from jammingOur spacer rollers effectively prevent the cable reels from jamming and always ensure smooth running of the reel. Mechanically attached rubber feetOur rubber feet are not glued, but mechanically fixed.This ensures a firm grip even on slippery industrial floors.

Our Cable Caddy Twin 3in1 cable dispenser is the perfect solution for unwinding large and heavy cable reels easily and quickly.Cable Caddy Twin 3in1 effectively prevents cables from twisting during unwinding. This saves time when laying the cables and is gentle on the material.Thanks to the innovative tilt roller control, the support roller can be easily repositioned with one hand movement, saving valuable working time.Stabilised by the supplied aluminium bar, the two unwinding rails are quickly positioned and ready for use.To ensure smooth operation of our Cable Caddy Twin 3in1, it is necessary that the reel dispenser is placed on a even and solid surface. If the Cable Caddy is placed at an angle, the reel may jump off the dispenser and damage it.One system - three settingsThe three different settings allow cable reels from a diameter of 280 mm up to a width of 840 mm to be unwound. The maximum diameter of the reel depends on the respective setting:Setting 1 - max. diameter: 400 mmSetting 2 - max. diameter: 550 mmSetting 3 - max. diameter: 1000 mmSupport rollers with FOUR ball bearingsOur support rollers are particularly stable and durable, as these are equipped with two ball bearing per side, which are firmly screwed to the side section.These carrying rollers are used exclusively for the CableCaddy product group. Spacer rollers prevent the cable reel from jammingOur spacer rollers effectively prevent the cable reels from jamming and always ensure smooth running of the reel. Mechanically attached rubber feetOur rubber feet are not glued, but mechanically fixed.This ensures a firm grip even on slippery industrial floors.

Thanks to two ball bearings, the 100 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The assembly is ideally done with the enclosed spacers. To avoid damaging the bearing, a stop nut should be used and the screw should not be tightened too much during assembly.Impact resistant pulleyTwo ball bearings with enclosed spacersLoad capacity: up to 200 kgMade in GermanyOuter diameter: 100 mmcompatible with 8 mm bolt (without spacers 10 mm)Total width: 35 mmRope diameter: up to Ø 20 mm

Thanks to two ball bearings, the 100 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The integrated spacers make it particularly easy to mount the pulley. No spacers or washers are needed.Impact resistant pulleyTwo ball bearings with integrated spacersLoad capacity: up to 250 kgMade in GermanyOuter diameter: 100 mmcompatible with 10 mm boltTotal width: 20 mmRope diameter: up to Ø 4 mm

Thanks to two ball bearings, the 100 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The galvanised steel bracket can be attached to your construction with an M8 screw. The retaining bracket can also be detached from the pulley to make installation as easy as possible, even in installation situations that are difficult to access. Impact resistant pulleyGalvanised steel bracketTwo ball bearingsLoad capacity: up to 250 kgMade in GermanyOuter diameter: 100 mmTotal height: 125,75 mmTotal width: 20 mmRope diameter: up to Ø 4 mmFastening with M8 screw / bolt

Thanks to two ball bearings, the 100 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The integrated spacers make it particularly easy to mount the pulley. No spacers or washers are needed.Impact resistant pulleyTwo ball bearings with integrated spacersLoad capacity: up to 350 kgMade in GermanyOuter diameter: 100 mmcompatible with 10 mm boltTotal width: 20 mmRope diameter: up to Ø 9 mm

Due to the extra wide plain bearing, the 100 mm pulley is guided particularly safely on the axle and has a high stability under shear loads.Together with the plain bearing, the pulley is made of 100 % plastic and is therefore completely protected against corrosion and other environmental influences.Impact resistant pulleyPlain bearing insertsLoad capacity: up to 150 kgMade in GermanyOuter diameter: 100 mmcompatible with 10 mm boltTotal width: 20 mmRope diameter: up to Ø 9 mm

Due to the extra wide plain bearing, the 140 mm pulley is guided particularly safely on the axle and has a high stability under shear loads.Together with the plain bearing, the pulley is made of 100 % plastic and is therefore completely protected against corrosion and other environmental influences.Impact resistant pulleyPlain bearing insertsLoad capacity: up to 150 kgMade in GermanyOuter diameter: 140 mmcompatible with 10 mm boltTotal width: 20 mmRope diameter: up to Ø 4 mm

Our guide pulley can be retrofitted to tensioned ropes - the split housing makes it possible. This makes the guide roller ideal for use as a running roller.If you hang the awning roller on the S-hook supplied, you can guide ropes with a diameter of up to approx. 7 mm on it.Impact resistant pulleyAxis of stainless steelMade in GermanyOuter diameter: 40 mmTotal Height: appr. 88 mmTotal width: 22 mmRope diameter: up to Ø 7 mmEye from S-Hook: 10 mm